Laying laminate flooring is a relatively easy task. However its important that all materials and steps are properly prepared for otherwise even the most seasoned DIY expert may make unecessary mistakes. The following guide gives step by step instructions on how to lay your laminate flooring. You should first verify which sub-floor you want to fit your Krono Original laminate flooring onto because the individual floorings are not suitable for every type of sub-floor.
Fitting laminate on screed
The floor must be absolutely level, dry, clean and firm. It is very important to sand down and fill any unevenness of more than three millimetres over one metre. You must use PE foil as a moisture barrier.
Fitting laminate on wooden planks
Loose floorboards must be fixed and uneven surfaces should be smoothed out to ensure a flat, firm surface to fit on. Fit the Krono Original laminate flooring at right-angles to the lengthwise direction of the wooden planks. You may …